• Features
• Performance and Spec's
• Part Number System
• Contacts and Tools
• Insert Tables
• Insert Arrangements
• Polarization
• Assembly Instructions
• Panel Cutouts
• Download Catalog

Performance Specifications

Operating Temperature Range
Finish B: -65°C to +175°C (-85°F to +347°F)
Finish F: -65°C to +200°C (-85°F to +392°F
Finish A: -65°C to +150°C (-85°F to +302°F)

Material and Plating Data (Finish)
B – aluminum shell, olive drab cadmium over nickel base
F – aluminum shell, electroless nickel finish
A– aluminum shell, silver to light iridescent yellow color
(bright) cadmium over electroless nickel

Corrosion Resistance
Finishes A and B withstand 500-hour salt spray.
Finish F withstands 48-hour salt spray.

Durability
Minimum of 500 mating cycles

Environmental Seal
Wired, mated connectors with specified accessories
attached, shall meet the altitude-immersion test specified in
MIL-DTL-38999.

Fluid Resistance
Connectors resist specified immersions in MIL-PRF-7808,
MIL-PRF-23699, MIL-PRF-5606, M2-V Chevron oil, Coolanol
25, MIL-DTL-83133 (JP-8), MIL-DTL-5624 (JP-4, JP-5),
SAE-AMS1424 Type I, and other solvents and cleaning agents.

Shell-to-Shell Conductivity

• Finish F = 1.0 millivolt maximum potential drop
• Finishes A and B = 2.5 millivolts maximum potential drop

Shielding Effectiveness
RFI and EMI attenuation at the specified frequencies meet
the requirements of MIL-DTL-38999.

• RFI shielding effectiveness of mated connectors with RFI
  backshells is measured in a triaxial radio frequency leakage
  fixture.
• EMI shielding effectiveness is measured at the interface
  of mated connectors and tested by the mode-stirred
  technique specified in method 3008 of MIL-STD-1344.
  

Shock and Vibration Requirements
Wired, mated connectors shall not be damaged, nor shall
there be a current interruption longer than one microsecond
when subjected to the following:

Standard Shock
Mated connectors withstand a pulse of approximate half
sine wave of 300 G ± 15 percent magnitude with duration of
3 ± 1 milliseconds applied in three axes per MIL-STD-1344,
method 2004.

High Impact Shock
When mounted as specified in MIL-S-901, grade A, a drop
of a 400 lb. Hammer from 1 foot, 3 feet and 5 feet applied to
connector in three axes, totaling nine impacts.

Vibration
Mated connectors, with proper accessories, withstand the
following vibration levels:

• Sine Vibration per MIL-STD-202, method 204, test
  condition G.
• l Random Vibration per MIL-STD-1344, method 205, test
  condition V and test condition VI, Letter “J” at ambient
  temperature.

Voltage Rating

	Maximum Operating Voltage**		Test Voltage	Test Voltage	Test Voltage	Test Voltage
Service	Sea Level		Sea Level	50,000 Ft.	70,000 Ft.	100,000 Ft.
Rating	AC (RMS)	DC	V RMS	V RMS	V RMS	V RMS
M	400	550	1300	550	350	200
N	300	450	1000	400	260	200
l	600	850	1800	600	400	200
ll	900	1250	2300	800	500	200