Features and Applications

AE5 Series hermetic connector receptacles are manufactured to Conesys Europe standards and meet all the requirements of MIL-DTL-5015.

AE5 Series hermetic connectors are intermountable and intermateable with MIL-DTL-5015 Series I solder plug, Series II front release plug, MIL-DTL-5015 Series III plug and also MIL-DTL-83723 Series II crimp-type plug connectors.

AE5 Series hermetic connectors are recommended for a wide range of applications, from commercial/industrial and mass-transportation systems to the most stringent high-reliability defense and aerospace requirements.

This family of hermetic connectors is available in three receptacle styles: square-flange wall mounting, and two solder mounting receptacles.

These hermetic connectors are available in passivated stainless steel material, and tin- or nickel-plated mild steel. Other materials can be proposed for special applications – Please consult factory.

Insert Arrangement

– AE5 Series hermetic connectors use MIL-STD 1651 insert arrangements. Contacts are available in sizes 16, 12, 8, 4, and 0.

Insert Polarization

– Alternate insert clocking positions prevent cross mating of adjacent connectors having the same insert arrangement.

Interfacial Pin Insert Seal

– Raised moisture barriers around each receptacle pin, which mate into lead-in chamfers of the plug hard face socket insert, provide individual contact sealing.

Glass Insulator

– These hermetic connectors are designed with sintered compression glass as an insulator.

Special Contacts

– AE5 Series hermetic connectors are available with special contact, i.e., thermo couple (chromel, alumel, etc.). Commercial P/N only.